单快拍相干信号自适应波束形成方法

针对低快拍条件下相干信号波束形成问题,提出一种单快拍相干自适应波束形成方法。首先,构造Duvall特征消除器滤除阵列接收信号中的期望信号,再利用空间平滑方法解相关。然后,依据Hung Tuner算法对平滑后的协方差矩阵进行Gram Schmidt正交化,快速重构干扰信号子空间。最后,将静态权矢量在干扰子空间内的正交投影作为波束形成最优权矢量。该算法可有效避免协方差矩阵求逆和特征分解造成的复杂计算,且能降低由于期望信号泄露造成的子空间估计误差,在单快拍条件下性能良好。仿真分析验证了算法的优越性和理论分析的有效性。     

催化光度法测定甲醇

基于甲醇对K2S2O8与亮绿间的氧化裉色反应有强烈的负催化作用,从而建立了一种测定甲醇动力学光度新方法.该法的线性范围为8.0×10-6～4.0×10-4mol/L;检出限为2.7×10-6mol/L;对1.0×10-5mol/L甲醇溶液连续进行11次测定,相对标准偏差为4.2%.将该方法用于工业洒精样品中甲醇含量的测定,结果较为满意.     

General and efficient parallel approach of finite element-boundary integral-multilevel fast multipole algorithm

A general and efficient parallel approach is proposed for the first time to parallelize the hybrid finiteelement-boundary-integral-multi-level fast multipole algorithm （FE-BI-MLFMA）. Among many algorithms of FE-BI-MLFMA, the decomposition algorithm （DA） is chosen as a basis for the parallelization of FE-BI-MLFMA because of its distinct numerical characteristics suitable for parallelization. On the basis of the DA, the parallelization of FE-BI-MLFMA is carried out by employing the parallelized multi-frontal method for the matrix from the finiteelement method and the parallelized MLFMA for the matrix from the boundary integral method respectively. The programming and numerical experiments of the proposed parallel approach are carried out in the high perfor- mance computing platform CEMS-Liuhui. Numerical experiments demonstrate that FE-BI-MLFMA is efficiently parallelized and its computational capacity is greatly improved without losing accuracy, efficiency, and generality.     

催化电位法测定人发中痕量碘

采用碱灰化法消解发样,于中性溶液中离心去除杂质,在酸性溶液中以催化电位法测定发碘含量,回收率达98.6％;变异系数(CV)为8.7％;测出中碘地区一个教学班20名男学生发碘平均含量为0.93μg/g,与文献报道相近。     

烟气分析在转炉冶炼过程中的应用研究

介绍转炉烟气分析控制系统,研究转炉烟气和炉气在冶炼过程中的变化规律,并开发烟气定碳模型。结论表明,在转炉冶炼过程中利用烟气成分的变化规律,可进行转炉炉况判断、终点判断和了解炉内反应过程。开发的烟气定碳模型对于含碳量低于0.12%的炉次,其控制精度为±0.02%,命中率为90%。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

俄语速读课教学软件的开发

随着现代外语教学的发展，传统的俄语速读方法已远远不能满足要求。笔者认为，应适应时代的要求，充分利用现代化的教学手段和教学设备来提高速读课的效率。本文将阐述计算机辅助俄语速读课教学系统及其功能、特点，并论证该系统在学生形成良好的阅读习惯和提高阅读能力中的优势。     

论艺术概括的基本方式和三个层次

艺术概括是塑造优秀文学形象的重要手段 ,它的基本方式是必须融会在个性书写过程中 ,以个性书写为形态。艺术概括包涵三个由浅入深的层次 ,即 ( 1)通过个性概括同类现象的共同特征 ;( 2 )通过个性深入揭示内在本质 ;( 3 )通过个性显示深广的社会意义。达到这三个层次 ,文学形象便可获得深厚的内在意蕴     

铅溴络合物极谱吸附波的研究

本文研究了铅溴络合物在高氯酸－磷酸－草酸介质中的极谱行为。确定底液组成为５％ＮａＢｒ－１１％ＨＣｌＯ４－５％Ｈ３ＰＯ４－０．８％Ｈ２Ｃ２Ｏ４。工作曲线线性范围为０－１５０μｇ／５０ｍｌ检测下限达０．０１μｇ／ｍｌ体系选择性好，应用于实际样品的测定，获得满意结果。     

现代汽车自动变速器的检测试验与故障判定

介绍了现代汽车自动变速器的检测试验方法,总结了根据试验结果判定自动变速器故障的方法。